Privacy Fence Slats for Chain Link Fence

Best Price - Service - Quality
If you find a lower price we can usually beat it.

Privacy Chain Link Fence Slats

Slat Information

Comparison Chart for Privacy Slats for Chain Link Fence

Slats for chain link fence

Slat Name (Click on the slat name to go to each page)	* Slat Width	Mesh Size	Wire Gauge	* Wind Load and Privacy Factor	* Lead-time for Shipping
Penny Link Slat	1 1/4"	** 2" & 2 1/4"	9, 11 or 11 1/2	75%	1-3 Days
Lite Link	1 1/4"	** 2" & 2 1/4"	9, 11 or 11 1/2	75%	1-3 Days
Option Lock 2" Top Locking	1 3/32"	** 2" & 2 1/4"	9, 11 or 11 1/2	75%	1-3 Days
Option Lock 2 1/4" Top Locking	1 1/4"	2 1/4"	9, 11 or 11 1/2	75%	1-3 Days
Feather Lock 2"	1 1/4"	2"	9 or 11	80%	1-3 Days
Feather Lock 2 1/4"	1 5/16"	2 1/4"	11 or 11 1/2	80%	1-3 Days
Winged Slat	1 7/16"	2" Mesh Only	9 or 11	90%	1-3 Days
Bottom Lock 2"	1 3/32"	** 2" or 2 1/4"	9 or 11	75%	1-3 Days
Bottom Lock 2 1/4"	1 1/4"	2 1/4"	11, 11 1/2 or 12	75%	1-3 Days
Bottom Lock 1 3/4" Tennis Court Mesh	7/8"	1 3/4"	6, 9 or 11	75%	1-3 Days
Industrial Slat	2 3/8"	3 1/2" x 5" Only	9 or 10	75%	1-3 Days
Hedge Link	Click on the link to the left				1-3 Days
Aluminum Slat	Click on the link to the left				7 Days

* Approximately
** Can be used in 2 1/4" and 2 3/8" mesh, but there will be less privacy.

How to measure chain link mesh
See the different sizes of chain link wire gauges
Read our Privacy Slat FAQ's.

Specifications

Materials: Extruded from High Density Polyethylene (HDPE), color pigments and ultra violet (UV) inhibitors, specifically designed to retard the harmful effects of the sun and lengthen the life of the product. The only exceptions are:

Winged Slats includes Ethyl Vinyl Acetate (EVA), a softer plastic to keep the wings flexible and resilient.
Hedge Link is made with 16-gauge, galvanized, braided wire and needles are made with 3-mil (PVC).

HDPE Technical Properties:
Melt Index (.6) A low melt index indicates improved stress and crack resistance

Density (.957) Polyethylene ranges anywhere from .914 to .960 in density. A higher density yields maximum stiffness without becoming overly brittle.

Minimum Temp. (-76 F) Polyethylene stays flexible even at this temperature extreme.

Maximum Temp. (250 F) Polyethylene does not distort until reaching this temperature.

Tensile Strength (3,700 psi) Material will not suffer distortion at lesser loads or impacts.

Durability: HDPE fence products are resistant to: severe weather conditions, salt water, sand, road dirt, most acids, alcohol, alkaline, ammonia, petroleum distillates, and common environmental pollutants.

Maintenance: Pressure cleaning of surface contaminants is quickly accomplished with plain water.

Beige

Black

Brown

Green

White

Redwood

Sky Blue

Royal Blue

Gray

These slat colors are approximations only, please refer to actual color samples for final matching.