YourFenceStore.com
 Toll Free 1-866-563-3623

     

Shopping CartCheck Out

100% Secure Shopping

 1-866-56-FENCE    Site Map

 
 

We ship to all 50 States!!

Vinyl Deck & Railing (PVC)

  Railing Home Page

Balusters Only

Railing Styles
    ►  Order & Pricing

  ► Twist
    ► Railing Accessories   ► Orleans Belly
    ► Railing Specifications   ► Colonial
    ► Shipping   ► Victorian
    ► Installation   ► Square Picket
 

Vinyl Deck and Railing Accessories

PVC Caps for Deck and Railing
All caps are for 4" square posts.
External Flat Post Cap for Vinyl Fences
Flat Cap

Part #:
VR-FLATCAP4

Ball Post Cap for Vinyl Fences
Ball Cap

Part #:
VR-BALLCAP4

Gothic Post Cap for Vinyl Fences
Gothic Cap

Part #:
VR-GOTHICCAP4

New England Post Cap for Vinyl Fences
New England Cap

Part #:
VR-NEWENGLANDCAP4

 

Rail Mount Brackets


All of our brackets meet I.B.C. and B.O.C.A.


   

2" x 3 1/2" Straight Rail Bracket  Part #: VR-MS235B
Used to mount the rails to the post. Reinforced with zinc die cast back bracket. The metal piece is mounted to the post. The top and bottom rails are mounted on to the metal bracket. The PVC piece slides over the metal bracket. There are no screws exposed. Screws are included.
Picture above is shown how the PVC piece covers up the metal. Once installed the metal piece is not exposed. This bracket is intended for a straight run (Flat surface).



2" x 3 1/2" Angle Rail Bracket
Part #: VR-AW-24V

Angle Wizard™ Bracket is designed for rails on porches and decks where custom angles are needed. Adjustable bracket moves your rail in either direction from 15 to 45 degrees. Built-in sight window indicates degree increments. Included are 5 - #10 x 1 1/2" stainless steel screws with painted heads. The dimensions of the base that rest against the post is 3 1/2" x 5".

2" x 3 1/2" Angle Rail Bracket
Part #: VR-AW-24H

Angle Wizard™ Bracket is designed for rails on stairs where custom angles are needed. Adjustable bracket moves your rail in either direction from 15 to 45 degrees. Built-in sight window indicates degree increments. Included are 5 - #10 x 1 1/2" stainless steel screws with painted heads. The dimensions of the base that rest against the post is 3 1/2" x 3 1/2".

 

 

Posts
You can cut posts to desired length, 38" for standard railing or 44" for stair rail (based on 36" high railing). We can also cut posts at no extra charge.


Newel Post
4" x 4" x 45" Long

Part #: VR-NEWEL4X45


Regular Square Post
4" x 4" x 48" Long

Part #: VR-POST4X48

 

Post Trim



Classic Trim Ring / Post Trim

Part #: VR-CLASSICTRIM4
 

 

Glue

8 oz. Rapid Set PVC Fence Glue is specifically designed for the PVC Fence Industry. Typically used to glue the caps onto the posts.

The benefits of using our glue include:
• Glue has a two (2) year shelf life
• Glue has a thick, rich consistency
• Glue is white to match PVC fences.

Part #: VR-GLUE8

 

Newel Post Mount System

The newel post mount is used to mount a newel post to the ground surface. The post mount is typically installed on wood or concrete.

Part #: Please call

 

Regular Square Post Mount System

Concrete and wood kits include anchors, leveling bolts and mounting plates. Built-in sizing stabilizers hold secure to the inner walls of the posts for maximum stability. Meets I.B.C. and B.O.C.A. Durable E-Coat finish. Fits 4 x 4 posts. Decorative PVC Base Trim included with kit.

Part #: VR- PMA44-CPS36-A

Part #: VR-PMA44-WPS36-A

 

Solar Lights

Solar lights gather the sun's energy during the day and store it in batteries to be converted into light at night. They require no wiring, are very easy to install, and run off the sun's energy so they cost nothing to run -- therefore are environmentally friendly.

Add solar lights to your railing posts. Click here for additional information and pricing.

 


 

 Check OutShopping Cart

Home   Vinyl Fence   Aluminum Fence   Chain Link Fence    Privacy Slats   Fence Wind Screening   Dog Kennels 
Vinyl Railing  Arbors    Trellis   Canopies   Picnic Tables   Site Map

©2000 - 2008  YourFenceStore.com.  All rights reserved.