UAS-101 Spear Point Aluminum Fence by Ultra Aluminum Fence

  • Sections are 6′ wide and come fully assembled
  • Spacing between pickets 1 5/8″
  • Post spacing is 72 1/2″ on center
  • Standard Colors: Black, Satin (Textured) Black, Bronze, Satin (Textured) Bronze, Beige, Satin (Textured) Khaki, White, Satin (Textured) White and Forest Green
  • Finish: Powercoat™. When applied, Powercoat™ finish is twice the thickness and hardness of a typical acrylic, baked enamel or “wet paint” finish, making it more durable, fade-resistant and scratch-resistant than other coatings.
  • Stainless steel fasteners
  • Life-time Warranty
  • Click here for additional specifications

Free Shipping! Click here for details.

This picture shows 3 horizontal cross rails.

Sections: All sections are 6′ long and come fully assembled. Pickets are spaced 1 5/8″. Post spacing 72 1/2″ on center.
Height of Fence2 Rails3 Rails4 Rails
3 Foot HighN/A$226.50N/A
3 1/2 Foot HighN/A$227.40N/A
4 Foot HighN/A$271.80N/A
4 1/2 Foot HighN/A$293.40N/A
5 Foot HighN/A$305.70N/A
6 Foot HighN/AN/A$373.50

Quality Made in the USA

Posts: It is recommend installing a post that is 3 feet longer than the overall height of the fence. For example, if your aluminum ornamental fence is 4 feet high, your posts would be 7 feet tall. For close up pictures of wall thicknesses – click here.
2″ Square Posts – Includes Cap.060″ Wall.080″ Wall.125″ Wall
5′ Line / End / Corner / Blank / 3 Way$44.00$51.00$70.00
6′ Line / End / Corner / Blank / 3 Way$46.00$56.00$80.00
7′ Line / End / Corner / Blank / 3 Way$51.00$63.00$92.00
8′ Line / End / Corner / Blank / 3 WayNA$68.00$104.00
9′ Line / End / Corner / Blank / 3 WayNA$75.00$113.00
Walk Gates 1 5/8″ Picket Spacing (Single Swing Gate) Gates are preassembled. Posts and gate hardware are not included. Please note: when ordering a gate, the actual width of the gate will be a few inches narrower. For example, a 48 inch wide gate will fit a 48″ wide opening (inside to inside post dimensions). The gate will be a few inches narrower than 48″ to accommodate the latch and hinges. Please call if you need a customized size of gate.
Height of Gate36″ Wide42″ Wide48″ Wide60″ Wide72″ Wide
3 Foot High$546.00$571.00$606.00$636.00$690.00
3 1/2 Foot High$572.00$598.00$620.00$675.00$722.00
4 Foot High$596.00$614.00$632.00$680.00$722.00
4 1/2 Foot High$614.00$632.00$668.00$720.00$777.00
5 Foot High$628.00$644.00$668.00$729.00$790.00
6 Foot High$680.00$711.00$745.00$805.00$868.00
Drive Gates 1 5/8″ Picket Spacing (Double Swing Gate) Gates are preassembled. Posts and gate hardware are not included. Please note: when ordering a gate, the actual width of the gate will be a few inches narrower. For example, a 48 inch wide gate will fit a 48″ wide opening (inside to inside post dimensions). The gate will be a few inches narrower than 48″ to accommodate the latch and hinges. Please call if you need a customized size of gate.
Height of Gate6′ Wide7′ Wide8′ Wide10′ Wide12′ Wide
3 Foot High$1,108.00$1,166.00$1,202.00$1,296.00$1,394.00
3 1/2 Foot High$1,166.00$1,209.00$1,264.00$1,438.00$1,482.00
4 Foot High$1,202.00$1,233.00$1,290.00$1,375.00$1,449.00
4 1/2 Foot High$1,219.00$1,263.00$1,352.00$1,460.00$1,573.00
5 Foot High$1,233.00$1,290.00$1,410.00$1,467.00$1,590.00
6 Foot High$1,375.00$1,446.00$1,506.00$1,645.00$1,762.00
AccessoriesEach
Rail End Standard$9.50
Rail End Adjustable (Horizontal or Vertical)$19.00
2″ Standard Cap$7.40
2″ Ball Cap (replaces the standard flat cap)$22.00
2 1/2″ Ball Cap (replaces the standard flat cap)$28.00
Latch – Magna Latch$168.00
Latch – Lokk Latch$49.00
Latch – Z Lokk$
Hinge – Adjustable Ultra Hinge (per pair) – Must be used with a 4″ post$305.00
Hinge – Standard Hinge – Aluminum (per pair)$33.00
Hinge – Tru Close Hinge Glass Filled (adjustable) (per pair)$93.00
Drop Rod – Standard$44.00
Drop Rod – LockboltPlease Call
Large Scroll$89.00
Butterflies Scroll (15 per 6′ section)$19.00
Circles (16 per 6′ section)$12.00
Quad-Finials (15 per 6′ section)$10.50
Tri-Finials (15 per 6′ section)$10.50
2 Piece Flange Cover (2″ Post)$24.00
Welded Floor Flange –  Flange is welded to the post (price does not include post)$44.00
Touch Up Paint 12 oz. spray can$33.00
3 Ft. Long Picket$10.50
3-1/2 Ft. Long Picket$11.50
4 Ft. Long Picket$13.50
4-1/2 Ft. Long Picket$14.50
5 Ft. Long Picket$15.50
6 Ft. Long Picket$18.00
Screws #8 x 5/8″ Stainless Steel (per Hundred)$19.50
Screws #8 x 1″ Stainless Stell Self Drill (per Hundred)$28.50
Shopping Cart
Scroll to Top