Privacy Fence Slats for Chain Link Fence
Best Price - Service - Quality
If you find a lower price we can usually beat it.
Privacy Chain Link Fence Slats
Aluminum Fence Slats
Aluminum Fence Slat
For that classic lattice look, turn to our Aluminum Fence Slats. Several attractive colors will enhance your chain link fence for years to come. The aluminum privacy chain link fence slats are installed diagonally to give a different look than the vertical fence slats.
Instructions for measuring the mesh size of a chain link fence.
Specifications: Aluminum Fence Slats are made for a 2" diamond and 9 or 11 gauge wire, will fit larger diamond sizes but the privacy will be less.
Coverage: Each quantity ordered will have 48 aluminum slats. For a 2 inch diamond, each quantity ordered will cover approximately 10 linear feet of fence (depends on how tight your fence is stretched - the average chain link fence with a 2 inch diamond has 41 diamonds for every 10 linear feet of fence).
Design: Manufactured of extruded aluminum with a gloss-baked enamel finish. The baked on enamel will not chip, crack and colors are fade resistant under normal conditions.
Wind load and privacy factor: Approximately 95% (based on wire/diamond used-stretched tension). Diamond sizes larger than 2 inches the privacy will be less.
Warranty: Manufacturer's 15-year limited pro-rata warranty.
Shipping: Approximately 1 to 3 weeksto ship.
Return Policy: Aluminum slats are non returnable.
Aluminum Fence
Slats for Chain Link Fences
The picture above shows the 1 in 5 pattern. To figure out how many aluminum slats you need for the 1 in 5 pattern you can see how to calculate it below.
Shipping Included
(48 contiguous states only - extra charge for Hawaii and Alaska)
When comparing prices, make sure freight is included in the price.
The above aluminum chain link fence slat colors are approximations only,
please refer to actual color samples for final matching.
Samples are available upon request. Fast & easy installation: This type of privacy slat is installed by laying each picket into the crevice that lies diagonally in chain link fence. After installing a series of 'background' pickets all on the same diagonal in adjacent crevices, a picket is installed counter diagonal by inserting the picket under a chain link weave, over a previously installed 'background' picket and then back under the chain link wire weave. These 'weave' pickets are what hold the others in place. All of the picket ends are held in place by sharply bending the pickets over the end of the last wire diamond at the top. If the slats are long enough, double them and stick the ends under the first available wire. This 'locks' the bottom in.
Calculation for the 1 in 5 pattern as pictured above
Background Calculation (white slats): Take the length of your fence, divide it by 50, times that by 166, divide that by 50, round that number up to the nearest whole number. This is the quantity you will need for the background color.
Foreground Calculation (black slats): Take the length of your fence, divide it by 50, times that by 83, divide that by 50, round that number up to the nearest whole number. This is the quantity you will need for the foreground color.
Calculation example for the White and Black slats as pictured above: If your fence is 117 feet long and you want the 1 in 5 pattern, this is how to figure out how many quantity of each color is required.
White Slats Required: 117 (fence length) divide by 50 times by 166 divide by 50 = 7.77 (round up to 8 for the quantity)
Black Slats Required: 117 (fence length) divide by 50 times by 83 divide by 50 = 3.88 (round up to 4 for the quantity)
Our customer Jeffrey sent this picture in to us saying that the slats were easy to install.
Close up picture of Aluminum Privacy Fence
Slats